In high-temperature industrial operations, thermal stability is the most critical indicator to evaluate whether an insulation material can operate safely over the long term. When furnace temperatures fluctuate from several hundred degrees to over 1200°C, any material that shrinks, powderizes, or collapses will cause heat leakage, lining damage, and unplanned shutdown risks. Therefore, only a Ceramic Insulation Blanket that maintains long-term structural stability at extreme temperatures can be considered a true solution for demanding thermal systems.
The superior thermal stability of CCEWOOL® Ceramic Insulation Blanket originates from deeply optimized manufacturing technologies:
High-purity alumina & silica raw material system, with impurities strictly controlled below 1%, preventing structural degradation at high temperatures.
Electric-furnace melting and high-speed centrifugal fiberization, producing fine, continuous fibers with ultra-low shot content and strong resistance to thermal shock.
Dual-sided needling process, forming a three-dimensional interlocked fiber network that resists powdering or collapse even under repeated heat cycling above 1000°C.
Intelligent control via our patented “Ceramic Fiber Intelligent Manufacturing Management System V1.0,” ensuring uniform fiber density and strength batch-to-batch, further enhancing thermal stability in extreme working conditions.
CCEWOOL® Ceramic Insulation Blanket has demonstrated exceptional performance in real industrial environments:
No powdering, shrinkage, or structural collapse during long-term high-temperature operation
Withstands frequent furnace cycling without thermal fatigue failure
Maintains tight surface contact, eliminating hot spots and thermal leakage
Significantly reduces maintenance frequency and unplanned shutdowns
Extends overall furnace lining life while improving energy efficiency

Spanish Customer
Cooperation years: 7 years
Ordered product: CCEWOOL® Ceramic Insulation Blanket
Product size: 25x940/280x7320mm
Our Spanish customer has continuously purchased CCEWOOL® Ceramic Insulation Blanket for 7 years. Their latest order (25×940 / 280×7320 mm) will again be applied in high-temperature furnace zones. The customer highly praised CCEWOOL® for its long-term structural stability — no powdering, no shrinkage, and consistent performance under extreme thermal stress — making it their preferred high-performance insulation solution.
Ceramic fiber blankets are widely used for industrial furnace backup insulation, furnace door insulation, pipe insulation, and continuous insulation layers behind ceramic fiber modules. For custom fabrication, blanket rolls are typically cut to specified widths, lengths, or shapes according to engineering drawings, then processed into multilayer insulation pads, flexible seals, or custom-shaped insulation components. To […]
Industry | 16 Nov, 2026
Destination: Pennsylvania, USAApplication: Replacement of Backup Insulation in Radiant-Section Walls and Roof of a Petrochemical Hydrogenation FurnaceProduct: Refractory Ceramic Fiber Blanket 2300°F | CCEWOOL®Sizes: 1″ × 24″ × 300″; 2″ × 24″ × 150″Density: 8 lb/ft³ (approx. 128 kg/m³)Packaging: Cartons + PalletsOrder Volume: 7 Pallets Recently, CCEWOOL® shipped seven pallets of ceramic fiber blankets to […]
Uncategorized | 12 Nov, 2026
When selecting a ceramic fiber board for industrial furnace backup insulation, the first consideration is the actual temperature experienced by the board. A classification temperature of 1260°C does not mean that the corresponding grade is suitable for continuous operation at 1260°C, just as the furnace chamber temperature cannot directly represent the interface temperature of a […]
Industry | 28 Oct, 2026